When you confirm the Call Sign the APRS test message will send. Enter the Call Sign and SSID dash number for the user you want to send the message to use the # key to switch from alpha to numbers, etc. After entering your text, confirm it with the Menu button to get to the next Call Sign / SSID entry screen. Go to the radio Menu –> APRS –> APRS SMS where you can add a text message using the microphone keys, use the # key to switch from alpha to numbers, etc. (Valid only when install the optional BT+APRS board) Sending APRS Text from one AnyTone radio to another that has the APRS Rx feature. Add APRS SMS function in the radio menu, allows the radio to receive and transmit APRS message.CPS->Tool-> Zone Hide Operation, allows you check or uncheck all Zone Hide. Since the Zone Hide is new inserted item, it may be checked automatically when open an existing codeplug. CPS->Common Setting ->Zone -> Zone hide, add Zone Hide function in the Zone menu, it allows user to hide some zone when they don’t need it on display.CPS->Common Setting-> Optional Setting ->GPS/Ranging -> GPS Roaming should be set ON to enable this function(make sure the GPS should be ON first). CPS->Common Setting ->GPS Roaming, allow user set a list of GPS locations, when GPS positioning is within the preset radiation radius of coordinates, the radio will switch to the corresponding zone.This configuration is only in use when the radio talks through a D578UV in repeater mode with fixed slot. In this mode, the radio receives on the selected slot in channel, but in transmission it will use the other slot. CPS->Common Setting->Channel ->DMR Mode, add "DCDM TS Split" mode.In CPS->Channel->Analog APRS Report Freq, allows select a TX frequency to transmit the analog APRS. CPS->APRS->Analog, add 8 groups analog TX frequency.Improve the Single Frequency Repeater unstable problem.Allow to select TG and RX group list for the new channel created in radio menu.CPS->Tool-> Channel Talker Alias Operation, allows you check or uncheck all Talker Alias in channel.Resolve the issue that Talker Alias setting is not saved in export CSV file.Resolve the issue in V1.25 that radio can’t contact Repeater.dcf file doesn’t work with Contact Manager V270. In CPS -> Optional Setting -> Key function, remove the Monitor and SubPTT from the long key function.Set the sub band default OFF when GPS roaming is turned On, to avoid the issue that sub band VFO channel jumps to random channel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |